
The NU330V Plus is the NUMOBAMS metal lathe machine for the point where a compact lathe stops keeping up. A 1500 W motor drives a 160 mm chuck on a bed with 330 mm of swing and 915 mm between centres — enough for shafts, bushings, sleeves, flanges and threaded fittings that a smaller machine has to split into two set-ups or turn away. Turning, facing and threading are all part of the job, which covers most of what a one-person workshop actually makes: repair parts, prototypes, one-off fittings and short runs for local customers.

It is still a benchtop metal lathe. The machine sits on a bench or a stand, goes into place without a crane, and is worked entirely by hand — handwheels on the carriage and the tailstock, a leadscrew and feed rod for feed work, and a control panel carrying the speed control and an emergency stop. There is no program to write, no file to post and no network to keep alive. The operator sets the speed, the feed and the depth of cut, and feels what the tool is doing through the handwheel.
Buyers arrive here from two directions. Some are stepping up from a smaller lathe that flexes under a real depth of cut or runs out of bed before the shaft ends. Others are replacing an old machine that no longer holds tolerance and is not worth repairing. Both are asking the same two questions: what will fit across the bed, and will the motor keep pulling when the tool bites. This one answers both without asking for a foundation or a specialist operator. It comes from one of the lathe machine manufacturers NUMOBAMS has worked with for years, and it arrives as a machine with a parts list behind it.






| Specification | Value |
|---|---|
| Model | NU330V Plus |
| Type | Manual metal lathe machine |
| Swing over bed | 330 mm |
| Distance between centres | 915 mm |
| Swing over carriage | 160 mm |
| Spindle bore | 38 mm |
| Chuck diameter | 160 mm |
| Motor power | 1500 W |
| Speed | Variable speed |
| Voltage | 220 V or 380 V |



Rigid where it counts. The bed and carriage are built to hold a cut rather than absorb it. On a light lathe a heavy pass pushes the tool away from the work, so the next pass simply repeats the last one; here the tool stays where it was set and the following pass cleans up. That is the whole argument for a machine of this weight class, and it shows most on interrupted cuts — keyways, flats, square sections — where the load changes with every revolution.

Designed to be worked on. The lathe is assembled in modules, so the carriage, the tailstock and the control cabinet can be reached and serviced without stripping the whole machine. For a small shop that is the difference between a two-day repair and a two-month wait. Because we order straight from the lathe machine manufacturers rather than through a distribution chain, individual components can be sourced instead of complete assemblies.
Simple to teach and simple to keep. A manual lathe is easier to hand on than a control language. A new operator can be shown the handwheels, the feed lever, the tailstock and the guard in an afternoon and be cutting scrap by the end of it, which matters on a training bench where several people share one machine. Maintenance follows the same logic: fewer systems to fail, and what does fail is visible.
Slots into a workshop that already exists. It needs a bench or a stand and clearance at both ends, nothing more. It also pairs naturally with a mill or a drill press, so a one-machine shop can grow into a turning and milling setup without moving premises or rewiring the building.
Built to be kept, not just bought. The question that matters two years in is not how the machine cut on day one but whether a bearing, a gear or a board can still be obtained. Most of what separates one lathe machine manufacturer from another shows up exactly there, which is why the parts list for this model stays on file with us.






| Item | Detail |
|---|---|
| Ships from | China |
| Dispatch | Within 90 days of order confirmation |
| Delivery | Tax-free, door-to-door service |
| Voltage | 220 V or 380 V, chosen at order |
| Payment | Credit card or T/T bank transfer |
| Supply | Direct from the lathe machine manufacturers |
| Regional stock | Moscow warehouse, subject to availability |
| Bulk orders | Volume pricing and long-term supply on request |






NUMOBAMS is a China-based machinery trading company working from Changsha, Hunan, with a selected network of manufacturing partners built up since 2016. That position lets us consolidate a full workshop order — machines, tooling and spare parts — into one shipment, inspect and prepare each unit before dispatch, and keep spare parts available long after delivery. We ship to Europe, the US and Canada on a tax-free, door-to-door basis, and usually dispatch within 90 days of order confirmation.


It turns, faces and threads metal, which covers the bulk of what comes through a small workshop: shafts, bushings, spacers, threaded studs, flanges and repair parts. With 1500 W behind the spindle you can take a heavier pass than a small hobby lathe allows, but the honest limit is set by the workpiece and the tooling rather than by a list of approved materials. If you are planning long runs in hard stock, tell us what you intend to machine and we will say plainly whether this is the right machine or whether you should be looking at a different class.
No. The machine carries a warning label telling you not to change speed while the spindle is running, and it is there for a reason: shifting under power puts the load through the drive and can damage it. Stop the spindle, select the speed, then start again. In practice you do this between passes, it takes seconds, and it quickly becomes part of how you work.
The chuck supplied with the machine covers most workholding on a lathe this size, and the tool post takes standard indexable holders, so most of what you already own in that range will go straight on. If you plan to fit a four-jaw, a faceplate or a collet setup, send us the details of the fittings you have and we will tell you what works before you order — it is a two-minute question that saves a return.
A level, rigid bench or stand, with enough clearance at both ends for the carriage travel and for long stock to overhang without hitting anything. A benchtop metal lathe will vibrate if the surface under it is not solid, and that vibration shows up as chatter in the finish, so a sturdy bench and a machine that sits firmly on it matter more than the size of the room. Leave clear access to the tailstock end and to the control panel.
It is a diy metal lathe in the sense that matters: one operator, hand controls, one-off and small-batch work, set up in minutes. It is not a production machine. Three-shift running, coolant through the spindle and unattended operation belong to a different class of equipment. If your day is mostly the same part over and over, tell us the part and the volume and we will point you at the right machine rather than sell you this one.
Yes — own-brand supply is a normal arrangement for us and is handled with the lathe machine manufacturer rather than improvised later. What has to be settled first is the specification you need held across repeat orders: the build, the markings and the documentation that goes out under your name. Start that conversation before the first unit ships, because some details are fixed at build time and cannot be added afterwards.