We use cookies to Improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
X
Home > Semi-Auto Lathe Lineup Comparison

Semi-Auto Lathe Lineup Comparison

Semi-Auto Lathe Lineup Comparison

Choosing between the Numobams builds is mostly a matter of matching the machine to the work in front of you, so this page gathers the published facts for the NU260ES in one place: its two axis configurations, the voltage, chuck and bed-length options, and the price you actually pay at checkout. If you are still weighing whether a semi cnc lathe is the right step up from a hand-controlled machine, the drive-type ladder below explains what linked axis control adds and what it asks of the operator; if you already know you want programmable turning, skip to the variant decoder and lock in the build for your cnc turning machine.

2 axis configurations 2-Axis CNC Linked / 2-Axis Linked Semi-Auto
$12,739.04 Current price, list $13,500.00
180 days Warranty on the control board
NUMOBAMS NU260ES 2-Axis Linked Semi-Auto Metal Lathe Machine

Published NU260ES specifications

Only fields the product page actually publishes appear below. Everything else is a question for the supplier, not a guess for this table.

NUMOBAMS NU260ES 2-Axis Linked Semi-Auto Metal Lathe Machine
Machine name NUMOBAMS NU260ES 2-Axis Linked Semi-Auto Metal Lathe Machine
Axis configurations 2-Axis CNC Linked / 2-Axis Linked Semi-Auto
Voltage options 110V / 220V
Chuck options 3-Jaw / 4-Jaw
Bed length options 500 mm / 700 mm
Tool holder options With a quick change tool holder / without a quick change tool holder
Workpiece materials Metals, plastics and composites
Price $12,739.04 — struck-through list price $13,500.00 (USD, with CNY selectable)
Warranty 180 days on the control board after delivery
Delivery condition Pre-adjusted and calibrated before shipment
Customer feedback 0.0 rating from 0 reviews; 1 unit recorded as sold

Blank is not zero. Spindle power, spindle bore, swing over bed, spindle speed and machine weight are not published on this product page — ask for those figures with your quote request before you commit to a build.

The drive-type ladder: manual, semi-auto, CNC linked

Before you compare models, compare categories. The bars are relative positions on cost, operator skill and setup time — they are a way of thinking, not a measurement of any one machine.

Step 1

Manual lathe

You engage every feed, depth and thread by hand. Cheapest to buy and quick to start, but output depends entirely on the operator's attention and the run is only as repeatable as the person standing at it.

CostLow
Operator skillHigh
Setup timeShort
Step 2

2-Axis Linked Semi-Auto

The NU260ES is listed in this configuration. Numobams describes a control system that lets operators program and execute machining tasks, cutting setup time and reducing errors, while the interface is pitched at people new to CNC-style operation.

CostMedium
Operator skillMedium
Setup timeMedium
Step 3

2-Axis CNC Linked

The second NU260ES configuration, where both axes run under programmed linked control. More of the cycle is taken out of the operator's hands, which is what you want for repeat runs — and what you pay for in programming time and operator training.

CostHigher
Operator skillHigher
Setup timeLonger per job

Four jobs, four builds

Each job below creates a requirement, and each requirement maps to a specific option on the NU260ES order form. That is the whole decision.

Scenario 1

Small metal parts, run after run

Repeat batches are where a programmable cycle pays for itself. The page positions the NU260ES around a control system that lets operators program and execute machining tasks, with the stated benefit of shorter setup and fewer errors — exactly the two costs that decide whether a fifty-part run is worth taking.

Decision: if your parts repeat to the same drawing, the quick change tool holder option keeps changeovers short between operations.

Scenario 2

Metals, plastics and composites in one shop

Numobams lists metals, plastics and composites as suitable workpiece materials. Plastic and composite blanks frequently arrive square, rectangular or otherwise non-round, which is the point where a three-jaw chuck runs out of answers and independent jaws take over.

Decision: choose the 4-jaw chuck option if square or irregular blanks are a routine part of your week.

Scenario 3

Repair work with constant tool changes

Maintenance turning is short cycles with different tools: face, turn, bore, part off. The NU260ES is offered with or without a quick change tool holder, and on repair-type work that single option can absorb more time than any other choice on the order form.

Decision: add the quick change tool holder if you swap tools more than once per part.

Scenario 4

A short bench and a 110V outlet

The machine is built to order with a 500 mm or 700 mm bed and a 110V or 220V supply. Those two choices are made at checkout, not after delivery, so measure the bench and check the outlet before you add to cart rather than planning to adapt later.

Decision: 500 mm bed plus 110V for a compact bench on North American power; 700 mm if there is room to spare.

What the NU260ES page commits to after delivery

Specifications are only half a purchase decision. The other half is what happens if something goes wrong, and here the product page is unusually specific. The machine ships pre-adjusted and calibrated for high-precision operation, and the manufacturer states it guarantees the overall working accuracy of the machine rather than the precision of every individual component.

Accuracy claims are settled with a cut, not a datasheet: the page asks buyers to verify accuracy through an actual cutting test, and states that accuracy responsibility does not extend to machines that have been disassembled without authorisation. The control board carries 180 days of cover from the day you receive the lathe, and a board that fails inside that window can be exchanged for a new one.

  • 180-day control board warrantyCounted from delivery, with a straight board-for-board exchange inside the window.
  • Pre-adjusted and calibratedSet up for high-precision operation before it leaves, so commissioning starts from a known baseline.
  • Accuracy verified by cutting testRun a real cut on arrival and record the result before the machine is opened up for anything.
NUMOBAMS NU260ES 2-Axis Linked Semi-Auto metal lathe machine, detail view

Build the machine around your work, then ask for the number

The NU260ES is configured at checkout across four option groups — voltage, chuck, bed length and tool holder — and each one changes what arrives on the pallet. If your build is not straightforward, or you are ordering more than one unit, send the requirement through and get the configuration, pricing and lead time confirmed in writing.

The product page also states that the design allows for easy customisation and compatibility with a range of accessories and attachments, which is the route to follow when a standard option group does not cover your job.

$12,739.04

Current price, list $13,500.00 — before any option or tooling additions are confirmed

Not sure which build fits your bench?

Send the part size, material, bench length and outlet voltage you are working with, and the configuration can be matched to the job before anything is ordered.

Direct enquiries: samli@numobams.com

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

NU260ES Lathe Options for Power, Workholding, and Tool Changes

NU260ES Lathe Options for Power, Workholding, and Tool Changes

Read article

NU260ES Metal Lathe for Small Metal Parts Production

NU260ES Metal Lathe for Small Metal Parts Production

Read article

What Does 2-Axis CNC Linked Mean on a Semi-Auto Metal Lathe?

What Does 2-Axis CNC Linked Mean on a Semi-Auto Metal Lathe?

Read article

Frequently Asked Questions

what is the nu260es and how is it configured?

the nu260es is the numobams 2-axis linked semi-auto metal lathe machine. the product page lists two axis-control configurations: 2-axis cnc linked and 2-axis linked semi-auto, and describes a control system that lets operators program and execute machining tasks with reduced setup time and fewer errors.

which voltage, chuck, bed length and tool holder options are available?

the nu260es order form offers 110v or 220v voltage, a 3-jaw or 4-jaw chuck, a 500mm or 700mm bed length, and a build with or without a quick change tool holder. these options are selected with the machine before checkout.

what workpiece materials does the nu260es page say it can handle?

the product page states that the lathe is suitable for metals, plastics and composites. it also describes the design as adaptable, with compatibility for a range of accessories and attachments.

what warranty comes with the nu260es control board?

the control board carries a 180-day warranty after you receive the lathe. a control board that fails within that period can be exchanged for a new control board. the page keeps this warranty specific to the control board.

how is accuracy handled after delivery?

numobams says the lathe is pre-adjusted and calibrated for high-precision operation on delivery, and guarantees the overall working accuracy of the machine rather than the precision of every individual component. accuracy should be checked with an actual cutting test, and unauthorised disassembly voids the accuracy responsibility.

what is the current price and how do i order the right build?

the page shows a price of $12,739.04 against a struck-through list price of $13,500.00, with usd and cny selectable. choose the voltage, chuck, bed length and tool holder options before adding the nu260es to the cart; for a non-standard build, contact numobams through the product page or the contact us page to confirm configuration, pricing and lead time.